We're giving this page a facelift!
Visit the previous versionto make edits.
Peak Mountain 3

Red Dawn

FA John Kear and William Penner (September 2009)
CREATED 
UPDATED 

Description

A great trad route and, as usual for this aspect of the Pino Wall, excellent stone abounds. Low on the route, we found an ancient, symmetrical hex slung with 1" webbing that looks like someone rapped off it in the 1970s. If anyone remembers trying this line before, feel free to chime in with their experiences.

Pitch 1 (5.10a) - Climb 30 ft up passing a small fir tree, stepping slightly left in a small trough to a large horizontal dike of compact red rock. Head straight up the hand crack and interesting tufa-like features, eventually reaching a large ledge. From the far left end of the ledge, climb up the arete past a piton (we will be placing this soon) to gain another ledge and continue on up the obvious corner and 2-bolt belay on the very large ledge. 120 ft.

Pitch 2 (5.10c) - Head up the obvious wide crack with Yosemite-style climbing for roughly 70 ft, eventually passing some jumbled blocks below a right-facing corner and roof. Climb up the corner to clip a bolt and pass the roof on its left side. Continue straight up over another small roof with a finger crack to the 2-bolt belay. 125 ft

Pitch 3 (5.11c) - Stellar. Climb straight up off the belay in a left-facing corner until the crack ends and it is possible to traverse left to a bolt. Clip the bolt and head left and up into an amazing thin crack in a prominent right-facing corner until reaching a roof. Pull the roof and enjoy another 40 ft of hand cracks and feature climbing to a 2-bolt belay on a great ledge. 115 ft

Pitch 4

(5.11c) - Airy and extremely memorable. Climb straight off the belay for 25 ft to a large chickenhead. Pull through some challenging thin cracks that trend right towards a bolt at the base of a pillar. Make some big moves and climb up the pillar to two more bolts on the face above. Thin, technical moves past the bolts lead to the arete and one of the coolest top-outs in all the Sandias. Belay off the 2-bolt anchor you rapped in on. 110 ft

Location

The route is located on the right side of the south face of Pino Wall. The route's start is 100 to 150 ft right of, and downhill from, the start of License and a Visa. Approach the Pino Wall in the standard way.

The best way to find the route is to walk east (down climb along the ridge) approximately 150 to 200 ft from the top of License and a Visa, passing a fallen dead tree, until you reach a big ledge with two bolts. Leave a cordelette on these bolts for the descent and rap straight down to a 2-bolt belay with chains. Rap again to a 2-bolt belay with quick-links that you can barely reach with a single 70 m rope. Extend this anchor with another cordelette to gain some more distance for the next rap that you can easily complete with two ropes going straight down to a massive ledge with a bolted belay and chains or, if you are rapping with a single 70 m rope, rap slightly left to a higher subsidiary ledge with a single bolt above the big shelf. You can down-climb from here to the larger shelf. As soon as possible we will be placing a fixed handline to facilitate this process. One more rap off the two-bolt anchor on the right end of the big shelf should get you to the ground or to a spot with 5 ft or so of easy down-climbing.

IMPORTANT NOTE: You can rap the route with a single 70 m rope but just barely and even then you need to pay close attention to the rope ends and do some down-climbing to reach the top of the first pitch and possibly the ground. If in doubt, bring a second rope!

Protection

Bring a few RPs or small stoppers in addition to a standard set of nuts, cams from .33 to 4" (4 Friend or newer 4 Camalot), bring doubles from .5-1.5. Also, bring two cordelettes to extend bolted anchors for rappelling.

Pitch 1: 1 fixed pin (once we get around to placing it) and belay bolts at the top Pitch 2: 1 bolt and a bolted belay Pitch 3: 1 bolt and a bolted belay Pitch 4: 3 bolts and belay bolts at the top